Vicom Systems FC-FC3 Manuel d'utilisateur télécharger pdf (Page 42)

CONFIDENTIAL [AK8999A/AW/AD]

MS1600-E-00 2014/05

- 42 -

8) Note on the Use of Output Reference Voltage

When output reference voltage adjustment is used, please be aware of the following.

When ELV[8] is changed from 0h to 1h, VOUT output voltage may shift by offset of an internal circuit (around 1

code of ELV[7:0] as maximum). When adjusted using ELV[8] = 1h, please check VOUT output voltage by

ELV[7:0] = 00h, and as the start point adjust to the target output reference voltage.

9) Note on the Use of Offset Voltage Fine Adjustment

When offset voltage fine adjustment is used, please be aware of the following. (It becomes the same contents as

the preceding paragraph.)

When EOCF[7] is changed from 0h to 1h, VOUT output voltage may shift by offset of an internal circuit (around

1 code of EOCF[6:0] as maximum). When adjusted using EOCF[7] = 1h, please check VOUT output voltage by

EOCF[6:0] = 00h, and as the start point adjust to the target offset voltage.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Pas de commentaire

Vicom Systems FC-FC3 Manuel d'utilisateur Page 42